Nano-Biomaterials
Melika Iloukhani; Mohammad Rabiee; Mahvash Oskoui; Fathollah Moztarzadeh; Mahdis Shayan
Volume 5, Issue 3 , June 2011, , Pages 193-204
Abstract
In recent years, nanoparticles have attracted considerable attention due to their special optical, chemical, and electrical properties. Developments of nanoparticles synthesis methods for producing materials with precise size and morphology have been considered recently. Among these methods, biosynthesis ...
Read More
In recent years, nanoparticles have attracted considerable attention due to their special optical, chemical, and electrical properties. Developments of nanoparticles synthesis methods for producing materials with precise size and morphology have been considered recently. Among these methods, biosynthesis has a special position for its high compatibility with environment. The use of microorganism in nanotechnology is one of the important aspects of this issue. In this survey we have used Escherichia coli 35218 to Cadmium Sulfide nanoparticles synthesis. First, appropriate time of cadmium ions addition and their maximum concentrations were determined that they dont inhibit bacterial growth. Then we studied intra and extracellular biosynthesis. According to this survey, this strain wasn't able to produce cadmium sulfide nanoparticles intracellulary but also these nanoparticles were extracellulary synthesized in the medium supplemented with L-cysteine. Formation of CdS nanoparticles, their morphologies and fluorescence properties were determined with WDX, SEM and fluorescence microscopy.
Maryam Parviz; Mohammad Rabiee; Mohammad Ali Shokrgozar; Fathollah Moztarzadeh; Farzad Yousefi Gharebaghi; Mahdis Shayan; Mohammad Reza Tahriri
Volume 3, Issue 2 , June 2009, , Pages 89-97
Abstract
A great deal of attention has been drawn to the colloidal chemistry based semiconductor nanocrysallites, also known as quantum dots (QDs). Because of the strong quantum confinement, quantum dots have unique size-dependent optical properties, which are much more superior to the conventional organic fluorescence ...
Read More
A great deal of attention has been drawn to the colloidal chemistry based semiconductor nanocrysallites, also known as quantum dots (QDs). Because of the strong quantum confinement, quantum dots have unique size-dependent optical properties, which are much more superior to the conventional organic fluorescence materials. In addition, strong chemical resistant makes inorganic semiconductor QDs an ideal candidate for next-generation of bio-labels and other biomedical applications. This study presents a synthesize method of high quality biocompatible CdSe QDs in aqueous solution by using gelatin as inhibitor. A thin ZnS layer was grown on CdSe QDs, forming a CdSe/ZnS core/shell structure, to improve the photoluminescence. The optical properties of the QDs were characterized by photoluminescence spectra. The stability of CdSe/ZnS QDs in aqueous solution has been improved with capping in mercaptosuccinic acid (MSA) groups. PAGE test results show that carboxylic groups of MSA have interacted with NH2 agent of CD20 antibodies. We evaluate the in vitro efficiency of the luminescence of the bioconjugated QDs to kill Raji cells. Raji cells have anti-CD20 which can especially connect to CD20-QDs. In conclusion, we found that CD20-CdSe/ZnS bioconjugated QDs with different concentration 50-250 µg/mL which have been exited at 400nm in 2h intervals can result in Raji cells death. This study shows the potential of CdSe/ZnS for cancer treatment.
Biomechanics of Bone / Bone Biomechanics
Mahmoud Azami; Fathollah Moztarzadeh; Mohammad Rabiee
Volume 3, Issue 4 , June 2009, , Pages 275-284
Abstract
During past decade, using biomimetic approaches has received much attention by scientists in the field of tissue substitutes preparation. These approaches have been employed for synthesis of bone tissue engineering scaffolds in the case of either materials or synthesis methods. In this study, an apatite ...
Read More
During past decade, using biomimetic approaches has received much attention by scientists in the field of tissue substitutes preparation. These approaches have been employed for synthesis of bone tissue engineering scaffolds in the case of either materials or synthesis methods. In this study, an apatite phase has been synthesized within gelatin hydrogel in biomimetic condition. The obtained composite hydrogel has changed to a porous scaffold with the application of freeze drying technique in order to be used in bone tissue engineering. To characterize the chemical composition and crystal structure of the synthesized precipitate within hydrogel, FTIR, XRD and TEM analysis were used. Surface morphology and porous structure of the scaffold were studied with SEM. SEM analysis was also used to investigate the quality of cultured osteoblast cells activity. Results approved formation of an apatite phase within gelatin hydrogel in biomimetic condition with crystallite size ranging between 7-10 nm. Porosity percentage of the obtained nanocomposite scaffold was about 82% with pores sizes in the range of 100-350μm. Young’s elastic modulus of the scaffold was comparable with that of the spongy bone. The osteoblast cells cultured on the scaffold showed adhesion, immigration and extracellular matrix excretion on the scaffold internal surfaces. Thus, obtained results indicated the potential ability of the prepared biomimetic bone tissue engineering scaffold to be used in bone tissue repair process.
Ali Nemati; Abdorreza Sheikh Mehdi Mesgar; Fathollah Moztarzadeh
Volume 3, Issue 2 , June 2009, , Pages 135-149
Abstract
In this paper, dissolution kinetics of Amorphous Calcium Phosphate as well as cements in the Simulated Osteoclastic Medium (SOM) was evaluated based on the Shrinking Core models considering the liquid-solid reactions. Based on this model, three steps may be considered as controlling steps in the system: ...
Read More
In this paper, dissolution kinetics of Amorphous Calcium Phosphate as well as cements in the Simulated Osteoclastic Medium (SOM) was evaluated based on the Shrinking Core models considering the liquid-solid reactions. Based on this model, three steps may be considered as controlling steps in the system: diffusion of component A through the surrounding films, reaction of component A with solid on the surface and diffusion through the interface. Two cases were considered here: 1. Shrinking Core model with formation of the intermediate phase 2. Shrinking Core model without formation of the intermediate phase Then, experimental data were used for the evaluation of the controlling steps and its mechanism (s). The results showed that enough amounts of calcium were entered into the solution in the initial stage of the process. This in turn causes to form a film on the particles, and the potential of calcium carbonate complex, resulted in the reduction of calcium saturation in the system. The amounts of entered calcium into the solution were higher in the amorphous system. In other words, a longer time is required in the crystalline system for more entrance of calcium into the solution (as in the sample H1T). Based on these observations, it was concluded that the approximately crystalline cements with carbonate falls between the crystalline cements without carbonate and amorphous system (The amounts of entered calcium into the solution). Dissolution rate of ACCPs in the Simulated Osteoclastic Medium (SOM) was dependent on the contents of carbonate and remaining water. Dissolution behavior in the SOM showed that the behavior of ACCP (high carbonate)–DCPD–PHA–Gelatin system was comparable to the ACCP (low carbonate)-DCPD. The presence of PHA and gelatin in cement system decreased the dissolution rate. The dissolution kinetics of the cements and ACCPs in the SOM was likely controlled by the formation of an acid-resisting ACP and/or DCPD as product layer.
Nader Nezafati; Fathollah Moztarzadeh; Saeed Hesaraki; Nasim Nosoudi
Volume 2, Issue 4 , June 2008, , Pages 277-283
Abstract
Calcium phosphate cements are among the formable calcium phosphate cements which are widely used for reconstruction of hard tissue injuries. Unfortunately, due to low mechanical strength, the application of such materials is only limited to non-load bearing like skull. We have investigated some mechanical ...
Read More
Calcium phosphate cements are among the formable calcium phosphate cements which are widely used for reconstruction of hard tissue injuries. Unfortunately, due to low mechanical strength, the application of such materials is only limited to non-load bearing like skull. We have investigated some mechanical and characteristics of a calcium phosphate cement which was reinforced with glass fiber. Compressed strength, setting time, phase composition and microstructure of the composite cement were among the cases which were investigated using appropriate techniques. The results indicated that adding only 15 weight percent of glass fiber (with about 100µm diameter) which was prepared using sol-gel method, does not show any meaningful change in the setting time of calcium phosphate cement This period of time was estimated about 20 minutes. Compressed strength of the cements without any fibers was 0.635MPa which was increased by adding fiber to 3.69MPa.The toughness of the cement was changed from 0.098KJ/m2 for cement without any fibers to 0.545KJ/m2 cement containing fibers. The XRD pattern of the composite samples which were maintained in the Ringer's solution showed that the reactant materials of the cement have almost thoroughly converted to hydroxyapatite which in this case does not show much difference with the non-fiber samples. As a whole, it seems that using glass fiber prepared by sol-gel method can considerably increase mechanical strength and toughness of calcium phosphate. This occurs without any effect on the quality of the cement.
Biomechanics of Bone / Bone Biomechanics
Seyed Mahmoud Rabiei; Fathollah Moztarzadeh; Mehran Solati Hashjin; Saeed Hesaraki
Volume 1, Issue 2 , June 2007, , Pages 105-110
Abstract
In this research, the influence of NaH2PO4.2H2O with different concentrations on setting time and compressive strength of bone cement based on hydroxyapatite was investigated. Hydroxyapatite cement is of calcium phosphate bone cements, which can be considered as the best substitute for hard tissues. ...
Read More
In this research, the influence of NaH2PO4.2H2O with different concentrations on setting time and compressive strength of bone cement based on hydroxyapatite was investigated. Hydroxyapatite cement is of calcium phosphate bone cements, which can be considered as the best substitute for hard tissues. The powder phase of the cement was prepared from various compositions of calcium phosphates such: tricalcium phosphate (TCP), calcium carbonate (CaCO3) and montite (CaHPO4) as constant and the liquid part using NaH2PO4.2H2O solution with different concentrations. The influences of liquid/powder ratio L/P (ml/g) was investigated on the initial and final setting times and compressive strengths of the cement. According to the obtained results, with optimum concentrations of the liquid phase, this cement seems suitable for clinical applications.
Biomechanics of Bone / Bone Biomechanics
Abdorreza Sheikh Mehdi Mesgar; Zahra Mohammadi; Fathollah Moztarzadeh; Mahtab Ashrafi Khouzani; Zeinab Sadat Mohammadi
Volume 1, Issue 1 , June 2007, , Pages 39-51
Abstract
Amorphous carbonated calcium phosphates (ACCPs) with different carbonate contents and Ca/P ratios were reproducible synthesized by the reaction parameters as low temperature, high pH value, using initial solutions of calcium and phosphate at low concentrations, and various amounts of carbonate, as well ...
Read More
Amorphous carbonated calcium phosphates (ACCPs) with different carbonate contents and Ca/P ratios were reproducible synthesized by the reaction parameters as low temperature, high pH value, using initial solutions of calcium and phosphate at low concentrations, and various amounts of carbonate, as well as freeze drying of the precipitates. The addition of carbonate to the solutions led to form precipitates with higher Ca/P ratios with respect to the initial solutions. Heat treatment of freezedried ACCPs at 500 °C had no influence on their amorphous structure. The results of elemental carbon and thermal analysis showed that the carbonate may be eliminated in a wide range of temperature (500−1150oC). Dissolution rate of ACCPs in the simulated bone resorption medium was dependent to the contents of carbonate and remaining water. Dissolution rate of the specimens with higher carbonate contents was controlled by the carbonate content, but the amount of remaining water had major influence on the dissolution rate of the precipitates with lower carbonate contents. The dissolution kinetics was found to follow a shrinking-core model, with product layer as the ratedetermining step. Formation of an amorphous calcium phosphate and/or thermodynamically desirable dicalcium phosphate dihydrate as possible product layer prevents complete resorption of ACCPs under bone resorption conditions, and promotes osteoblastic activation process through nucleation and growth of biological apatite.
